Making Porcelain Doll Aprons

Now that you have created patterns to makezigzags. You want to stitch the seams at the
your porcelain doll dress, you may want to add anback to the dot and to the hem. Gather your
apron to enhance her fashion. Aprons arestitches, running them in a line and at the crown.
relatively simple to make. You will need material,To create the edge of your apron, cut any
including 6 inches of light colored plain-wovenunwanted length.
fabrics (Batiste) to make your apron. You will alsoApron making is created in a few methods, which
need lace, about 3/8 inches with narrowed edges.include cutting out the "shoulder straps" and the
In addition, you will need white DMC thread madewaistline per outline or pattern. You want to
of poly-cotton, embroidery white thread, fabriccrisscross when stitching along the thin edges of
glue and spray, embroidery DMC thread (pink andthe lace. Continue stitching to the middle edges at
green; 818-pink; 524-green) and studs for yourthe back and bring the right edges collectively to
apron. (OOO-Studs)open the apron at the back middle. Now you can
Now that you have your items, you can beginfold the lace, press and add a couple of lines while
making your apron. You can either procure lace orcollecting the stitches near the edges of the
else design your own edges. In this instance, wecrown of your kilt. Gather and pull up the fitted
are going to make up edges, such as the scallopkilt, collecting it to meet the waist and compare
and ruffles.the middle front as well as the notch. Make sure
You will need craft paper and pencil to draw yourthe gathered area is even. Stitch collectively and
apron pattern. Once you have the pattern drawn,brush the seams whilst using the crisscross
cut it out. Use your stabilizer spray, at the bottommethod to complete your task.
untreated edges, spray about 2 inches, and allowNext, trim the shoulder ruffles in a straight line
it to dry. Press your rigid fabric. Now, beginalong the pattern to sew fabric edges. (Scallop)
sewing a fabric edging, i.e. an ornamental undulateNow take your stitches, gather, and run a few
edge in your fabric. (Scallop) You want to sewlines along the curvatures of the edge of your
along the bottom untreated edges. Next, sewshoulder ruffles. Between the notches on your
parallel with the distance across your skirt. Leaveshoulder scrap, place your completed edges and
1/2 inch or 1 inch opening at the right side of youreven them out as you sew the seam lines and
"foot presser." Avoid sewing overly close to thethe trim. Now, fold the straps along the folded line.
untreated edges.Press your pattern and turn it so that it falls
TIP: If you use a sewing machine, use yourbeneath the untreated edges. Next, sew hidden
settings to form the scallop method.stitches beneath the strap, preparing the seams
Next, use your fabric glue and run it the length ofof your ruffles. The shoulder straps can now go
the outside edges of your pattern. Allow the glueon the waistband, which should compare to the
to dry and then cut excessive fabric using craftnotches. Before you complete your task,
scissors to fit. Cut another 15 inches lengthwise ofcompare the shoulder straps to your doll to make
your fabric and another 4 inches widthwise. Yousure it fits, and then complete your stitching.
are now ready to start stitching your ruffles. SewView high-quality wolf pictures and pictures of
your embroidery scallop on after you finish thewolves at the Wolf Facts site.
untreated edges, stitching the edges so that it